Hook-i Eyelets | Wheelchair Anchor Points
There are 3 standard types of Hook-i Eyelet, each designed to fit 3 different diameters of tubing - 22mm, 26mm and 29mm. Other sizes or styles are available to order for odd or larger shaped wheelchair frames.
Type A - universal fitting suitable for manual or electric wheelchairs
Type B - suitable for horizontal frame tubes and heavy electric wheelchairs
Type C - suitable for front anchor points on manual attendant wheelchairs
PLEASE NOTE Hook-i Eyelets must be fitted by a Brotherwood representative.
Hook-i eyelets provide permanent, simple, easily recognisable anchor points onto which transport providers can attach 4 point restraint systems. Safety when travelling is of paramount importance.
No welding or special tools are needed to fit the Hook-i anchor points. Light and strong, made in stainless steel for fit-and-forget applications. The Hook-i anchor points will fit 90% of tubular framed wheelchairs.
To achieve the best and most effective use of the restraint system of the vehicle in which the wheelchair plus passenger are being transported, attachments should be as near to the seat base as possible. The aim is to position each Hook-i attachment point so that the restraint is secured at a recommended angle in the region of 45° on each corner of the wheelchair.
- Easily recognisable and safe Light and strong for ‘fit and forget’ application
- Will fit most tubular framed wheelchairs
- No welding or special tools required
- Compliant with ISO 10542
We are well aware that HOOK-I TECH products may be simple to fit, but we emphasise that any proprietary restraint anchor points need to conform to the recommended geometry of ISO 7176 / 19.